Part Number : 908317 | Manufacturer : Sasco Inc | ||
NSN : 5330-00-360-8285 (5330003608285) | |||
Item Name : Corkandrubberstrip | CAGE Code : 58275 | ||
NIIN : 00-360-8285 (003608285) | |||
FSC Code : 5330 Packing and Gasket Materials | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 11417 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number 908317, that of which is listed with the description Corkandrubberstrip; Manufactured by Sasco Inc and listed alongside the NSN 5330003608285, part number 908317 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 908317 | Manufacturer : Sasco Inc | ||
NSN Number : 5330-00-360-8285 (5330003608285) | |||
Item Name : Corkandrubberstrip | CAGE Code : 58275 | ||
NIIN : 003608285 | |||
FSC CODE : 5330 Packing and Gasket Materials |
Thank you for taking an interest in part number 908317, that of which is listed with the description Corkandrubberstrip; Manufactured by Sasco Inc and listed alongside the NSN 5330003608285, part number 908317 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5330-00-360-8285 Item PartTypeName: CORK AND RUBBER STRIP | 5330 | 003608285 | P | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
A | 0 | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
GPW9623 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AASH | MINIMUM TENSILE STRENGTH | 150 POUNDS PER SQUARE INCH |
ABGL | WIDTH | 0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM |
ABNM | THICKNESS | 0.169 INCHES MINIMUM AND 0.207 INCHES MAXIMUM |
ABRY | LENGTH | 20.750 INCHES MINIMUM AND 21.790 INCHES MAXIMUM |
ADYW | BINDER MATERIAL | RUBBER,SYNTHETIC |
MATT | MATERIAL | CORK AND RUBBER |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-12803,NO. F226000-1S9 MIL SPEC SINGLE MATERIAL RESPONSE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote