| Part Number : CR9162-4-5 | Manufacturer : Satair Usa Inc | ||
| NSN : 5320-00-582-3275 (5320005823275) | |||
| Item Name : Rivet Blind | CAGE Code : R1120 | ||
| NIIN : 00-582-3275 (005823275) | |||
| FSC Code : 5320 Rivets | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 00864 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: CR916245 | |||
Thank you for taking an interest in part number CR9162-4-5, that of which is listed with the description Rivet Blind; Manufactured by Satair Usa Inc and listed alongside the NSN 5320005823275, part number CR9162-4-5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m singapore pte ltd
CAGE Code: QA095 |
12 volt shop
CAGE Code: Z0JM2 |
|
25 canadian forces supply depot
CAGE Code: 35637 |
3m espana sa
CAGE Code: 0211B,H7034 |
|
400hz repair
CAGE Code: 03MS6 |
3dbm co inc
CAGE Code: 31791,62874 |
|
2is inc
CAGE Code: 1ZKD0 |
21st century optics inc
CAGE Code: 0TN38 |
|
31 mile equipment co
CAGE Code: 07PE3 |
3gen grup trafik ltd
CAGE Code: TB427 |
|
3 ring inc
CAGE Code: 68310 |
3d robotics llc
CAGE Code: 64TY6 |
|
3m unitek corporation
CAGE Code: 90444 |
3d evolution ltd
CAGE Code: KD959 |
|
3m health care service center
CAGE Code: 0UTW7 |
| Part Number : CR9162-4-5 | Manufacturer : Satair Usa Inc | ||
| NSN Number : 5320-00-582-3275 (5320005823275) | |||
| Item Name : Rivet Blind | CAGE Code : R1120 | ||
| NIIN : 005823275 | |||
| FSC CODE : 5320 Rivets | |||
Thank you for taking an interest in part number CR9162-4-5, that of which is listed with the description Rivet Blind; Manufactured by Satair Usa Inc and listed alongside the NSN 5320005823275, part number CR9162-4-5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5320-00-582-3275 Item PartTypeName: RIVET,BLIND | 5320 | 005823275 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| RV201-4-5 | 3 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASB | FASTENER LENGTH | 0.420 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE-LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZE | SHANK DIAMETER | 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| AAZF | SHANK STYLE | SELF-PLUGGING |
| AAZG | HEAD MAJOR DIAMETER | 0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| ABAF | EXPANSION DEVICE | SERRATED STEM-TYPE W |
| ANEE | GRIP LENGTH | 0.251 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | W/SPECIAL PULLING HEAD |
| MATT | MATERIAL | ALUMINUM ALLOY 2017 STEM |
| MATT | MATERIAL | ALUMINUM ALLOY 2117 BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE STEM |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL OR OXIDE FILM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
