| Part Number : 95-M2203 | Manufacturer : Sauer Sundstrand Gmbh And Co | ||
| NSN : 4320-01-365-2907 (4320013652907) | |||
| Item Name : Pump Axial Pistons | CAGE Code : 14120 | ||
| NIIN : 01-365-2907 (013652907) | |||
| FSC Code : 4320 Power And Hand Pumps | |||
| FSG Code : 43 Pumps And Compressors | |||
| INC Code : 14791 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 95M2203 | |||
Thank you for taking an interest in part number 95-M2203, that of which is listed with the description Pump Axial Pistons; Manufactured by Sauer Sundstrand Gmbh And Co and listed alongside the NSN 4320013652907, part number 95-M2203 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 95-M2203 | Manufacturer : Sauer Sundstrand Gmbh And Co | ||
| NSN Number : 4320-01-365-2907 (4320013652907) | |||
| Item Name : Pump Axial Pistons | CAGE Code : 14120 | ||
| NIIN : 013652907 | |||
| FSC CODE : 4320 Power And Hand Pumps | |||
Thank you for taking an interest in part number 95-M2203, that of which is listed with the description Pump Axial Pistons; Manufactured by Sauer Sundstrand Gmbh And Co and listed alongside the NSN 4320013652907, part number 95-M2203 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | Special Features | HYDRAULIC DISPLACEMENT CONTROL (HDC) 14.5 - 60.0PSI; STD PRESSURE LIMITER RANGE IN PORTS A AND B; MTG PAD SAE C W/ SEALED COVER; 1.00IN.DIA SIDE PORTS (PER SAE J518C CODE 61); SHAFT 14T 12/24PITCH SPLINE; HOLLOW PISTONS; CASE DRAIN PORT 1.0625-12NPT; 108.LB; 240.0DEG F |
| AHYV | Maximum Discharge Flow Rate | 85.0 GALLONS PER MINUTE |
| AHZJ | Pump Reciprocating Design | SINGLE ACTING |
| AAYV | Discharge Connection Quantity | 1 |
| AHYW | Discharge Pressure | 2900.0 POUNDS PER SQUARE INCH GAGE |
| AJAF | Unpackaged Unit Length | 12.050 INCHES NOMINAL |
| AHZD | Pump Rotation Direction | CLOCKWISE |
| MRC | Decoded Requirement | Clear Text Reply |
| AHYZ | Operating Speed At Rated Capacity | 4300.0 REVOLUTIONS PER MINUTE |
| AHZN | Reciprocating Stroke Type | VARIABLE |
| AHZA | Pumping Element Operating Position | HORIZONTAL |
| AAXZ | Cylinder Quantity | 9 |
| AJAB | Drive Shaft Type | SPLINED, INVOLUTE EXTERNAL |
| AJAG | Unpackaged Unit Width | 8.1100 INCHES NOMINAL |
| AHZP | Volume Control Type | HYDRAULIC CYLINDER |
| AHZQ | Control Location | CENTER |
| AJAH | Unpackaged Unit Height | 9.780 INCHES NOMINAL |
| AAXX | Mounting Type | FLANGE |
| AENG | Pumping Element Type | PISTON |
| SUPP | Supplementary Features | CHARGING PUMP 1.20CU IN/REV, 350.0PSI, INLET 1.3125-12NPT |
| AAYW | Discharge Connection Type | RECTANGULAR FLANGE |
| AAYX | Drive Connection Type | RIGID COUPLED |
| AAYT | Intake Connection Quantity | 1 |
| AAYU | Intake Connection Type | RECTANGULAR FLANGE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
