| Part Number : FE103 | Manufacturer : Schramm Inc | ||
| NSN : 3020-00-166-0045 (3020001660045) | |||
| Item Name : Gear Helical | CAGE Code : 53496 | ||
| NIIN : 00-166-0045 (001660045) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number FE103, that of which is listed with the description Gear Helical; Manufactured by Schramm Inc and listed alongside the NSN 3020001660045, part number FE103 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : FE103 | Manufacturer : Schramm Inc | ||
| NSN Number : 3020-00-166-0045 (3020001660045) | |||
| Item Name : Gear Helical | CAGE Code : 53496 | ||
| NIIN : 001660045 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number FE103, that of which is listed with the description Gear Helical; Manufactured by Schramm Inc and listed alongside the NSN 3020001660045, part number FE103 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-166-0045 Item PartTypeName: GEAR,HELICAL | 3020 | 001660045 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 48-6306 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,SOLID |
| AGJS | PITCH DIAMETER | 3.2500 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 22 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CBBL | FEATURES PROVIDED | SPECIAL MARKING |
| CQFM | HARDNESS RATING | 12.7 ROCKWELL C MINIMUM OVERALL AND 20.5 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.375 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 28.3574 DEGREES |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.010 INCHES FIRST END |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.032 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 0.875 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.375 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.252 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.826 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 1.940 INCHES BOTH ENDS |
| FEAT | SPECIAL FEATURES | 2ND END CHAMFERED 0.112 IN. BY 45 DEG; 1ST END TIMING MARK ON SIDE OF TOOTH 45 DEG 5 MIN CW FROM KEYWAY |
| MATT | MATERIAL | IRON OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
