| Part Number : GA36A | Manufacturer : Schramm Inc | ||
| NSN : 3020-00-554-9029 (3020005549029) | |||
| Item Name : Gear Helical | CAGE Code : 53496 | ||
| NIIN : 00-554-9029 (005549029) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05464 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number GA36A, that of which is listed with the description Gear Helical; Manufactured by Schramm Inc and listed alongside the NSN 3020005549029, part number GA36A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : GA36A | Manufacturer : Schramm Inc | ||
| NSN Number : 3020-00-554-9029 (3020005549029) | |||
| Item Name : Gear Helical | CAGE Code : 53496 | ||
| NIIN : 005549029 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number GA36A, that of which is listed with the description Gear Helical; Manufactured by Schramm Inc and listed alongside the NSN 3020005549029, part number GA36A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-554-9029 Item PartTypeName: GEAR,HELICAL | 3020 | 005549029 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GA36A | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 2.5370 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.7305 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 18.7665 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.750 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.4985 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.155 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.8337 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.000 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | TIMING MARK LOCATED 45 DEG CW FROM CENTER LINE OF KEYWAY,DRILL POINT ON CENTER LINE OF A TOOTH,0.062 IN. BY 45 DEG CHAMFER OF BORE 1ST END |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI C1113 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
