| Part Number : DPJJD787-278 | Manufacturer : Schulze Mfg Inc | ||
| NSN : 6105-00-635-2180 (6105006352180) | |||
| Item Name : Motor Control | CAGE Code : 73693 | ||
| NIIN : 00-635-2180 (006352180) | |||
| FSC Code : 6105 Motors Electrical | |||
| FSG Code : 61 Electric Wire and Power and Distribution Equipment | |||
| INC Code : 19258 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: DPJJD787278 | |||
Thank you for taking an interest in part number DPJJD787-278, that of which is listed with the description Motor Control; Manufactured by Schulze Mfg Inc and listed alongside the NSN 6105006352180, part number DPJJD787-278 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : DPJJD787-278 | Manufacturer : Schulze Mfg Inc | ||
| NSN Number : 6105-00-635-2180 (6105006352180) | |||
| Item Name : Motor Control | CAGE Code : 73693 | ||
| NIIN : 006352180 | |||
| FSC CODE : 6105 Motors Electrical | |||
Thank you for taking an interest in part number DPJJD787-278, that of which is listed with the description Motor Control; Manufactured by Schulze Mfg Inc and listed alongside the NSN 6105006352180, part number DPJJD787-278 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6105-00-635-2180 Item PartTypeName: MOTOR,CONTROL | 6105 | 006352180 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 238943 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 2.813 INCHES |
| AAJU | OVERALL LENGTH | 4.031 INCHES |
| AAJV | OVERALL WIDTH | 2.375 INCHES |
| AASA | THREAD LENGTH | 0.120 INCHES NOMINAL FIRST END |
| ABND | TAPER LENGTH | 0.179 INCHES MINIMUM FIRST END AND 0.189 INCHES MAXIMUM FIRST END |
| ABXQ | FLATTED PORTION LENGTH | 0.3120 INCHES NOMINAL SECOND END |
| ACDC | CURRENT TYPE | AC INPUT |
| AGRB | FLAT DEPTH | 0.1400 INCHES NOMINAL SECOND END |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE |
| BFMF | COOLING METHOD | NONVENTILATED |
| BFMJ | CONTROL FIELD CURRENT RATING IN AMPS | 0.335 |
| BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS | 313.0 |
| BFML | CONTROL FIELD WINDING TYPE | TWO WINDINGS,SERIES CONNECTED |
| BKPB | CURRENT RATING METHOD | NO LOAD |
| BKPH | TORQUE RATING AND TYPE | 3.0 INCH-OUNCES STALLED |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 115.0 AC |
| CBBL | FEATURES PROVIDED | SINGLE PHASE ADAPTABILITY AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CQJX | NOMINAL THREAD SIZE | 0.112 INCHES FIRST END |
| CQRR | TAPER | 7.500 PER FOOT IN INCHES FIRST END |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.375 INCHES FIRST END |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.531 INCHES SECOND END |
| CWDY | TEMP RATING | 65.0 AMBIENT DEG CELSIUS AND-55.0 OPERATING DEG CELSIUS AND 55.0 OPERATING DEG CELSIUS |
| CWFX | ROTOR SPEED RATING IN RPM | 11400.0 SINGLE NO LOAD |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.437 INCHES |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 2.437 INCHES |
| CWGL | CURRENT RATING IN AMPS | 0.220 SINGLE INPUT |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHZ | SHAFT END CHARACTERISTIC | A2 FIRST STYLE FIRST END AND A4 SECOND STYLE FIRST END |
| CWHZ | SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SECOND END |
| FAAZ | PHASE | SINGLE INPUT |
| FEAT | SPECIAL FEATURES | MTG HOLES SPOTFACE 0.312IN. DIA IRREGULARLY SPACED ON 2.437 IN. BOLT CIRCLE |
| FREQ | FREQUENCY IN HERTZ | 400.0 INPUT |
| THSD | THREAD SERIES DESIGNATOR | UNF FIRST END |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 SCREW |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
