| Part Number : N116 | Manufacturer : Scott Huber Essick | ||
| NSN : 3020-00-429-7492 (3020004297492) | |||
| Item Name : Gear Bevel | CAGE Code : 99832 | ||
| NIIN : 00-429-7492 (004297492) | |||
| FSC Code : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 05463 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number N116, that of which is listed with the description Gear Bevel; Manufactured by Scott Huber Essick and listed alongside the NSN 3020004297492, part number N116 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : N116 | Manufacturer : Scott Huber Essick | ||
| NSN Number : 3020-00-429-7492 (3020004297492) | |||
| Item Name : Gear Bevel | CAGE Code : 99832 | ||
| NIIN : 004297492 | |||
| FSC CODE : 3020 Gears Pulleys Sprockets and Transmission Chain | |||
Thank you for taking an interest in part number N116, that of which is listed with the description Gear Bevel; Manufactured by Scott Huber Essick and listed alongside the NSN 3020004297492, part number N116 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-429-7492 Item PartTypeName: GEAR,BEVEL | 3020 | 004297492 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| N116 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 5.3330 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 16 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 5.6880 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 2.2390 INCHES |
| CWMW | TEETH TYPE | STRAIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQD | PITCH ANGLE | 58.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.1250 INCHES SECOND END |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.2390 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.8750 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.2520 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.3125 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.7510 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.0000 INCHES SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 2.5000 INCHES FIRST END |
| MATT | MATERIAL | IRON MALLEABLE OVERALL |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE,FRONT HUB RECESSED,BACK HUB PROTRUDING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
