| Part Number : 9310C961618 | Manufacturer : Scott Industrial Systems Inc | ||
| NSN : 4320-01-451-0099 (4320014510099) | |||
| Item Name : Motor Hydraulic | CAGE Code : 22841 | ||
| NIIN : 01-451-0099 (014510099) | |||
| FSC Code : 4320 Power And Hand Pumps | |||
| FSG Code : 43 Pumps And Compressors | |||
| INC Code : 06128 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 9310C961618, that of which is listed with the description Motor Hydraulic; Manufactured by Scott Industrial Systems Inc and listed alongside the NSN 4320014510099, part number 9310C961618 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 9310C961618 | Manufacturer : Scott Industrial Systems Inc | ||
| NSN Number : 4320-01-451-0099 (4320014510099) | |||
| Item Name : Motor Hydraulic | CAGE Code : 22841 | ||
| NIIN : 014510099 | |||
| FSC CODE : 4320 Power And Hand Pumps | |||
Thank you for taking an interest in part number 9310C961618, that of which is listed with the description Motor Hydraulic; Manufactured by Scott Industrial Systems Inc and listed alongside the NSN 4320014510099, part number 9310C961618 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| ABUJ | Thread Size | 0.875-14 AND 0.875-14 AND 0.4375-20 |
| MRC | Decoded Requirement | Clear Text Reply |
| AGAV | End Item Identification | NAVY WEAPONS CODE JN, WASP CLASS LHD |
| AFFL | Mounting Bolt Circle Diameter | 4.190 INCHES NOMINAL |
| AJAB | Drive Shaft Type | KEYED AND THREADED |
| AKCT | Shaft Rotation Direction | CLOCKWISE AND COUNTERCLOCKWISE |
| AWLS | Connection Type | INLET AND OUTLET AND DRAIN |
| AXFQ | Constant Displacement Per Revolution | 18.710 CUBIC INCHES |
| ABTB | Mounting Hole Diameter | 0.535 INCHES NOMINAL |
| ABTJ | Mounting Hole Quantity | 4 |
| FEAT | Special Features | M8 X 1.25-6H, 0.85IN. DEEP INTERNAL THREAD IN END OF OUTPUT SHAFT; USED IN CEMENT BIN ASY OF PAVEMENT REPAIR SYSTEM |
| AGVN | Shaft Thread Size | 0.3150-20.32 |
| AJLF | Housing Material | STEEL |
| AKYD | Accessory Components And Quantity | MAGNETIC SPEED PICK-UP WITH SHROUD CONNECTOR 1 |
| AEQC | Operating Speed At Rated Capacity In Rpm | 246 |
| AAJF | Thread Direction | RIGHT-HAND |
| AKAL | Shaft Screw Thread Length | 0.850 INCHES NOMINAL |
| AJYP | Screw Thread Series Designator | UNF |
| ARQA | Shaft Protrusion Length | 2.220 INCHES NOMINAL |
| ABWV | Shaft Diameter | 1.2605 INCHES NOMINAL |
| AKAF | Shaft Thread Direction | RIGHT-HAND |
| APJC | Thread Location | INTERNAL |
| AAST | Key Length | 1.7720 INCHES NOMINAL |
| AAXX | Mounting Type | FLANGE |
| AZFE | Connection Government Spec/Std | SAE J1926 |
| AXFC | Connection Design | THREADED |
| AXFE | Key Height | 0.3132 INCHES NOMINAL |
| AXFB | Maximum Working Pressure Rating At Specified Temp Range | 3000PSI |
| AXFP | Displacement Type | CONSTANT |
| ABSF | Key Width | 0.3930 INCHES NOMINAL |
| ASMM | Connection Quantity | 1 AND 1 AND 1 |
| AAPL | Torque Load Rating | 235.0 INCH-POUNDS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
