| Part Number : 9866 | Manufacturer : Sensor Systems Inc | ||
| NSN : 5905-00-079-8634 (5905000798634) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 04454 | ||
| NIIN : 00-079-8634 (000798634) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37407 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 9866, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Sensor Systems Inc and listed alongside the NSN 5905000798634, part number 9866 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 9866 | Manufacturer : Sensor Systems Inc | ||
| NSN Number : 5905-00-079-8634 (5905000798634) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 04454 | ||
| NIIN : 000798634 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 9866, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Sensor Systems Inc and listed alongside the NSN 5905000798634, part number 9866 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-079-8634 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 000798634 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9866 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0630 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.500 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.874 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0550 INCHES MINIMUM AND 0.0850 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 2.000 NOMINAL INCHES |
| ABWV | SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.437 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.000 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 2.218 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0880 NOMINAL MILS AND 0.0980 NOMINAL CENTIMETERS |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | CUBIC MEASURE | 3.141 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.5 PERCENT,RATED AMPERES C AND BETTER FLOORING |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0/400.0 SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/5.0 SINGLE SECTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 1250.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK PRIMARY INPUT |
| FEAT | SPECIAL FEATURES | COUPLING ATTACHED TO SHAFT |
| TEST | TEST DATA DOCUMENT | 18876-13059259 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 SOLDER STUD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
