Part Number : A752 | Manufacturer : Sensor Systems Inc | ||
NSN : 5905-00-140-2853 (5905001402853) | |||
Item Name : Resistor Variable Nonwire Wound | CAGE Code : 04454 | ||
NIIN : 00-140-2853 (001402853) | |||
FSC Code : 5905 Resistors | |||
FSG Code : 59 Electrical and Electronic Equipment Components | |||
INC Code : 37405 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number A752, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Sensor Systems Inc and listed alongside the NSN 5905001402853, part number A752 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : A752 | Manufacturer : Sensor Systems Inc | ||
NSN Number : 5905-00-140-2853 (5905001402853) | |||
Item Name : Resistor Variable Nonwire Wound | CAGE Code : 04454 | ||
NIIN : 001402853 | |||
FSC CODE : 5905 Resistors |
Thank you for taking an interest in part number A752, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Sensor Systems Inc and listed alongside the NSN 5905001402853, part number A752 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-00-140-2853 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 001402853 | 0 | N | B | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | B | A | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
A752 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAPN | SECTION QUANTITY | 1 |
AEFD | ACTUATOR TYPE | SINGLE SHAFT |
AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
AEFK | MAXIMUM STARTING TORQUE | 0.20 INCH-OUNCES |
AEFL | MAXIMUM RUNNING TORQUE | 0.20 INCH-OUNCES |
AXGY | MOUNTING METHOD | CLAMP RING |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.000 KILOHMS SINGLE SECTION |
CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.29 TO 0.29 SINGLE SECTION |
CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
CQTM | TERMINAL LOCATION | REAR END |
CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0 TO 400.0 SINGLE SECTION |
CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
TEST | TEST DATA DOCUMENT | 19315-1951193 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote