| Part Number : FDC752 | Manufacturer : Sensor Systems Inc | ||
| NSN : 5905-00-431-3651 (5905004313651) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 04454 | ||
| NIIN : 00-431-3651 (004313651) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number FDC752, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Sensor Systems Inc and listed alongside the NSN 5905004313651, part number FDC752 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : FDC752 | Manufacturer : Sensor Systems Inc | ||
| NSN Number : 5905-00-431-3651 (5905004313651) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 04454 | ||
| NIIN : 004313651 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number FDC752, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Sensor Systems Inc and listed alongside the NSN 5905004313651, part number FDC752 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-431-3651 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 004313651 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NYLC1229 | 2 | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AAVL | PILOT DIAMETER | 0.96880 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.06700 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.447 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.968 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.05700 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 1.094 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.125 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.666 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.234 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.09400 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.06200 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 68.0 MINIMUM AND 70.0 MAXIMUM |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 300.000 OHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 90.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -2.00 TO 2.00 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.3 TO 3.3 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 148.9 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 05624-NYLC1229 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
