| Part Number : 978-50K5K | Manufacturer : Sensor Systems Inc | ||
| NSN : 5905-00-808-5995 (5905008085995) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 04454 | ||
| NIIN : 00-808-5995 (008085995) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37408 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 97850K5K | |||
Thank you for taking an interest in part number 978-50K5K, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Sensor Systems Inc and listed alongside the NSN 5905008085995, part number 978-50K5K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 978-50K5K | Manufacturer : Sensor Systems Inc | ||
| NSN Number : 5905-00-808-5995 (5905008085995) | |||
| Item Name : Resistor Variable Wire Wound Pre | CAGE Code : 04454 | ||
| NIIN : 008085995 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 978-50K5K, that of which is listed with the description Resistor Variable Wire Wound Pre; Manufactured by Sensor Systems Inc and listed alongside the NSN 5905008085995, part number 978-50K5K is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-808-5995 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 008085995 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 58A122C1184 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -5.0 TO 5.0 OHMS ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SOLDER STUD |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.702 INCHES MINIMUM AND 2.791 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.624 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.358 INCHES MINIMUM AND 0.392 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.292 INCHES MINIMUM AND 2.327 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.085 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 1800.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.40 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 1.20 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 160.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS 1ST SECTION AND 5.0 KILOHMS 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1800.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10 TO 0.10 1ST SECTION AND-0.20 TO 0.20 2ND SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.9 FREE AIR ALL SECTIONS AND 0.5 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | 1ST SECTION ZERO BASED LINEARITY AND 2ND SECTION TERMINAL BASE LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 2ND SECTION |
| AAVM | PILOT LENGTH | 0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.624 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
