| Part Number : 6181 | Manufacturer : Sensor Systems Inc | ||
| NSN : 5905-00-835-5349 (5905008355349) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 04454 | ||
| NIIN : 00-835-5349 (008355349) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 6181, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Sensor Systems Inc and listed alongside the NSN 5905008355349, part number 6181 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 6181 | Manufacturer : Sensor Systems Inc | ||
| NSN Number : 5905-00-835-5349 (5905008355349) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 04454 | ||
| NIIN : 008355349 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 6181, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Sensor Systems Inc and listed alongside the NSN 5905008355349, part number 6181 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-835-5349 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 008355349 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 156PS123 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| ADAV | OVERALL DIAMETER | 1.750 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -40.0 TO 30.0 SINGLE SECTION |
| AAQL | BODY STYLE | CYLINDRICAL TAB/FLANGE MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.290 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.297 INCHES MINIMUM AND 1.328 INCHES MAXIMUM |
| ABTD | MOUNTING SLOT WIDTH | 0.119 INCHES MINIMUM AND 0.129 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.187 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.470 INCHES MINIMUM AND 0.490 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.810 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,UNDERCUT |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 240.0 MINIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.526 INCHES MINIMUM AND 1.536 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | UNABLE TO DECODE | UNABLE TO DECODE |
| AXGY | MOUNTING METHOD | FLANGE AND SLOT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 150.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQTM | TERMINAL LOCATION | REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -15.0 TO 15.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 20.0 SINGLE SECTION |
| FEAT | SPECIAL FEATURES | 1 WATT AT 80 DEG C |
| TEST | TEST DATA DOCUMENT | 18876-9175703 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
