| Part Number : 9603 | Manufacturer : Sensor Systems Inc | ||
| NSN : 5905-00-920-8973 (5905009208973) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 04454 | ||
| NIIN : 00-920-8973 (009208973) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 9603, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Sensor Systems Inc and listed alongside the NSN 5905009208973, part number 9603 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 9603 | Manufacturer : Sensor Systems Inc | ||
| NSN Number : 5905-00-920-8973 (5905009208973) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 04454 | ||
| NIIN : 009208973 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 9603, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Sensor Systems Inc and listed alongside the NSN 5905009208973, part number 9603 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-920-8973 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 009208973 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9603 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.87495 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.932 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.87495 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 2.025 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.150 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 2.200 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.9900 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 320.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 60.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 60.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 200.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.001 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| APXH | TERMINAL LOCATION | LEFT ADJACENT SIDE TWO ROWS |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 2ND SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 PERCENT,RATED AMPERES C AND BETTER FINISH |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 320.0 NOMINAL |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -500.0 TO 500.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.8 7TH SECONDARY PATTERN |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.26 7TH SECONDARY FINISH |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/10.0 2ND SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 1ST SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| TEST | TEST DATA DOCUMENT | 89954-539D818 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
