| Part Number : HR42 | Manufacturer : Shallcross Inc | ||
| NSN : 5905-00-256-9466 (5905002569466) | |||
| Item Name : Resistor Fixed Wire Wound Noninductive | CAGE Code : 54294 | ||
| NIIN : 00-256-9466 (002569466) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 00010 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number HR42, that of which is listed with the description Resistor Fixed Wire Wound Noninductive; Manufactured by Shallcross Inc and listed alongside the NSN 5905002569466, part number HR42 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
2101 llc
CAGE Code: 1GH76 |
3 phoenix inc
CAGE Code: 3NJE3 |
|
21st century optics inc
CAGE Code: 0TN38 |
3gen grup trafik ltd
CAGE Code: TB427 |
|
12 volt shop
CAGE Code: Z0JM2 |
3m purification pty limited
CAGE Code: Z5295 |
|
3m co health care services sales
CAGE Code: 0Z2D0 |
400hz repair
CAGE Code: 03MS6 |
|
4 ld inc
CAGE Code: 0ACW5 |
3d safety services pty ltd
CAGE Code: Z2JB4 |
|
3m touch systems inc
CAGE Code: 0A1V7 |
498 msug
CAGE Code: 5VW08 |
|
20th century fiberglass
CAGE Code: 80241 |
3m alaska
CAGE Code: 0NZU5 |
|
360 tents l l c
CAGE Code: 4CT45 |
| Part Number : HR42 | Manufacturer : Shallcross Inc | ||
| NSN Number : 5905-00-256-9466 (5905002569466) | |||
| Item Name : Resistor Fixed Wire Wound Noninductive | CAGE Code : 54294 | ||
| NIIN : 002569466 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number HR42, that of which is listed with the description Resistor Fixed Wire Wound Noninductive; Manufactured by Shallcross Inc and listed alongside the NSN 5905002569466, part number HR42 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -15.0/+15.0 |
| AAPP | ELECTRICAL RESISTANCE | 225.400 OHMS |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -0.100/+0.100 |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 145.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -65.0/+145.0 |
| AAQZ | INCLOSURE METHOD | ENCAPSULATED |
| AARB | TERMINAL TYPE | WIRE LEAD |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 2.000 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 0.130 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.380 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 0.100 FREE AIR |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL EACH END |
| TEST | TEST DATA DOCUMENT | 06481-912113 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
