Part Number : JH6169 | Manufacturer : Sigma Tek Inc | ||
NSN : 5310-00-487-5470 (5310004875470) | |||
Item Name : Washer Spring Tension | CAGE Code : 86887 | ||
NIIN : 00-487-5470 (004875470) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 15938 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number JH6169, that of which is listed with the description Washer Spring Tension; Manufactured by Sigma Tek Inc and listed alongside the NSN 5310004875470, part number JH6169 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : JH6169 | Manufacturer : Sigma Tek Inc | ||
NSN Number : 5310-00-487-5470 (5310004875470) | |||
Item Name : Washer Spring Tension | CAGE Code : 86887 | ||
NIIN : 004875470 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number JH6169, that of which is listed with the description Washer Spring Tension; Manufactured by Sigma Tek Inc and listed alongside the NSN 5310004875470, part number JH6169 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-487-5470 Item PartTypeName: WASHER,SPRING TENSION | 5310 | 004875470 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | ||||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
JH6169 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAUB | HOLE DIAMETER | 0.830 INCHES NOMINAL |
ABKV | OUTSIDE DIAMETER | 1.250 INCHES NOMINAL |
ABKW | OVERALL HEIGHT | 0.075 INCHES NOMINAL |
ABPX | MATERIAL THICKNESS | 0.009 INCHES MINIMUM AND 0.011 INCHES MAXIMUM |
MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote