| Part Number : S10-10-5344 | Manufacturer : Sikorsky Aircraft Corporation | ||
| NSN : 5310-00-208-8953 (5310002088953) | |||
| Item Name : Nut Plain Round | CAGE Code : 78286 | ||
| NIIN : 00-208-8953 (002088953) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15887 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: S10105344 | |||
Thank you for taking an interest in part number S10-10-5344, that of which is listed with the description Nut Plain Round; Manufactured by Sikorsky Aircraft Corporation and listed alongside the NSN 5310002088953, part number S10-10-5344 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : S10-10-5344 | Manufacturer : Sikorsky Aircraft Corporation | ||
| NSN Number : 5310-00-208-8953 (5310002088953) | |||
| Item Name : Nut Plain Round | CAGE Code : 78286 | ||
| NIIN : 002088953 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number S10-10-5344, that of which is listed with the description Nut Plain Round; Manufactured by Sikorsky Aircraft Corporation and listed alongside the NSN 5310002088953, part number S10-10-5344 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-208-8953 Item PartTypeName: NUT,PLAIN,ROUND | 5310 | 002088953 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| S10-10-5344 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQU | DRIVE POINT DEPTH | 0.062 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| ACTA | NUT STYLE | ROUND |
| ACTD | NUT DIAMETER | 1.531 INCHES MINIMUM AND 1.594 INCHES MAXIMUM |
| ADBG | NUT THICKNESS | 0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| ADBH | DRIVE POINT WIDTH | 0.156 NOMINAL MILS AND 0.219 NOMINAL CENTIMETERS |
| ADBM | DRIVE POINT QUANTITY | 4 |
| ALET | HOLE TYPE AND QUANTITY | 1 TAPPED |
| BZRR | THREAD SERIES | UN |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 1.000 INCHES |
| CQTW | HOLE THREAD QUANTITY PER INCH | 32 |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION F |
| CRSQ | COUNTERSINK ANGLE | 89.75 DEGREES MINIMUM NUT AND 90.25 DEGREES MAXIMUM NUT |
| CSPF | HOLE NOMINAL THREAD DIAMETER | 0.164 INCHES |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AN-P-61 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
