| Part Number : 6538 | Manufacturer : Skf Industries Inc | ||
| NSN : 3110-00-157-6105 (3110001576105) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 43766 | ||
| NIIN : 00-157-6105 (001576105) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 6538, that of which is listed with the description Bearing Ball Annular; Manufactured by Skf Industries Inc and listed alongside the NSN 3110001576105, part number 6538 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 6538 | Manufacturer : Skf Industries Inc | ||
| NSN Number : 3110-00-157-6105 (3110001576105) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 43766 | ||
| NIIN : 001576105 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 6538, that of which is listed with the description Bearing Ball Annular; Manufactured by Skf Industries Inc and listed alongside the NSN 3110001576105, part number 6538 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-157-6105 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 001576105 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CB1096C | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAVZ | GROOVE DIAMETER | 1.6200 INCHES MINIMUM AND 1.6230 INCHES MAXIMUM |
| ABGF | GROOVE WIDTH | 0.5100 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.8750 INCHES NOMINAL |
| ABNZ | EFFECTIVE LENGTH | 1.2500 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.3750 INCHES MINIMUM AND 1.3830 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 2.8125 INCHES NOMINAL |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AEPR | FLANGE OUTSIDE DIAMETER | 2.0600 INCHES MINIMUM AND 2.0650 INCHES MAXIMUM |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZD | BORE SHAPE | STRAIGHT |
| CTHY | CONTACT ANGLE | 25.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | BANDED OD |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | CLUTCH RELEASE,INTEGRAL INNER RING W/FORK GROOVE,SLIDER TYPE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
