| Part Number : 597308 | Manufacturer : Skf Usa Inc | ||
| NSN : 5330-01-557-7603 (5330015577603) | |||
| Item Name : Seal Plain | CAGE Code : 80201 | ||
| NIIN : 01-557-7603 (015577603) | |||
| FSC Code : 5330 Packing and Gasket Materials | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 04250 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 597308, that of which is listed with the description Seal Plain; Manufactured by Skf Usa Inc and listed alongside the NSN 5330015577603, part number 597308 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 597308 | Manufacturer : Skf Usa Inc | ||
| NSN Number : 5330-01-557-7603 (5330015577603) | |||
| Item Name : Seal Plain | CAGE Code : 80201 | ||
| NIIN : 015577603 | |||
| FSC CODE : 5330 Packing and Gasket Materials | |||
Thank you for taking an interest in part number 597308, that of which is listed with the description Seal Plain; Manufactured by Skf Usa Inc and listed alongside the NSN 5330015577603, part number 597308 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-01-557-7603 Item PartTypeName: SEAL,PLAIN | 5330 | 015577603 | P | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 597308 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | Special Features | SKF AXIAL CLAMP SEALS ARE PRODUCED IN THREE DIFFERENT DESIGNS:CT1, CT3, AND CT4 DESIGN; THESE AXIAL CLAMP SEALS ARE MADE OF APPROPRIATELY PROFILED STRIPS OF NON-REINFORCED NITRILE RUBBER WHICH ARE HELD FIRMLY IN PLACE BY STAINLESS STEEL SCREW-TYPE CLAMPS; THEY ARE AVAILABLE IN THE DIAMETER RANGE 150 TO 4600 MM; THE SEALS DO NOT ROTATE BUT SEAL AXIALLY AGAINST A ROTATING COUNTERFACE; CT3 DESIGN:THE SEALS OF THE CT3 DESIGN DIFFER FROM THOSE OF THE CT1 DESIGN ONLY IN THE FORM OF THE SEALING LIP; THIS IS AGAIN FLAT BUT IS PROVIDED WITH ANNULAR GROOVES; THESE SERVE TO TRAP CONTAMINANTS WHICH MAY HAVE STARTED TO PENETRATE THE LIP/COUNTERFACE CONTACT; THE MAXIMUM OPERATING INTERFERENCE FOR THESE SEALS IS +4,8 MM; SHAFT:42.500 IN.; OD:43.688 IN.; WEIGHT:4.250 LBS |
| CPCW | Housing Bore Diameter | 0.937 INCHES NOMINAL |
| CXCY | Part Name Assigned By Controlling Agency | AXIAL CLAMP SEALS CT3 DESIGN |
| MRC | Decoded Requirement | Clear Text Reply |
| ADUC | Seal Width | 1.125 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
