| Part Number : MS27645-6 | Manufacturer : Society Of Automotive Engineers Inc | ||
| NSN : 3110-00-042-4810 (3110000424810) | |||
| Item Name : Bearing Ball Airframe | CAGE Code : 81343 | ||
| NIIN : 00-042-4810 (000424810) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00041 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: MS276456 | |||
Thank you for taking an interest in part number MS27645-6, that of which is listed with the description Bearing Ball Airframe; Manufactured by Society Of Automotive Engineers Inc and listed alongside the NSN 3110000424810, part number MS27645-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3 com corporation
CAGE Code: 002S5,05PN6,0DPU4,0EWG6,0H6Y3,0L086,0PGJ9,0V0C3,0ZQ35,64034 |
394 test maintenance squadron sac
CAGE Code: 33044 |
|
2 mb distribution
CAGE Code: FAH01 |
5dt inc
CAGE Code: 3BPF1 |
|
20 10 products inc
CAGE Code: 09KC9 |
3m unitek corporation
CAGE Code: 90444 |
|
485 engineering installation group
CAGE Code: 13676,14943 |
4 cs electronic packaging inc
CAGE Code: 60744 |
|
1064100 alberta ltd
CAGE Code: L0C80 |
20th century spring mfg
CAGE Code: 0PZE8 |
|
3m health care service center
CAGE Code: 0UTW7 |
1 nation electronics llc
CAGE Code: 1XP36 |
|
3gen corporation
CAGE Code: 3SPS3 |
3m nederland b v
CAGE Code: H1248 |
|
3 m federal systems dept
CAGE Code: 68352 |
| Part Number : MS27645-6 | Manufacturer : Society Of Automotive Engineers Inc | ||
| NSN Number : 3110-00-042-4810 (3110000424810) | |||
| Item Name : Bearing Ball Airframe | CAGE Code : 81343 | ||
| NIIN : 000424810 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number MS27645-6, that of which is listed with the description Bearing Ball Airframe; Manufactured by Society Of Automotive Engineers Inc and listed alongside the NSN 3110000424810, part number MS27645-6 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-042-4810 Item PartTypeName: BEARING,BALL,AIRFRAME | 3110 | 000424810 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 940.83.28.508 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 0.3750 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.4375 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.4690 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.6200 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZC | LOAD DIRECTION | RADIAL |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CTFZ | STANDARD TOLERANCE DESIGNATION | AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS |
| FEAT | SPECIAL FEATURES | 80 PCT. FULL OF MIL-G-81322,AXIAL PLAY 0.030 IN. MAX.,HEAT TREAT RINGS AND BALLS TO ROCKWELL C 60 TO 66 AND STABILIZED FOR OPERATION AT 250 DEG.F,10 DEG SELF-ALIGNING IN EITHER DIRECTION |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATT | MATERIAL | STEEL COMP E51100 OR STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL CORROSION RESISTING RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| SFTT | SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| STYL | STYLE DESIGNATOR | SINGLE ROW SELF ALIGNING SINGLE ROW INNER RING EXTENDED BOTH SIDES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
