| Part Number : MS21152-1 | Manufacturer : Society Of Automotive Engineers Inc | ||
| NSN : 3110-00-434-4653 (3110004344653) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 81343 | ||
| NIIN : 00-434-4653 (004344653) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: MS211521 | |||
Thank you for taking an interest in part number MS21152-1, that of which is listed with the description Bearing Ball Rod End; Manufactured by Society Of Automotive Engineers Inc and listed alongside the NSN 3110004344653, part number MS21152-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
498 msug
CAGE Code: 5VW08 |
3m aerospace
CAGE Code: R0844 |
|
320 matlogpel breda centrale
CAGE Code: H2851 |
3m belgium nv
CAGE Code: B2281 |
|
21st century electronics inc
CAGE Code: 60092 |
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
|
3e technologies international inc
CAGE Code: 1DEZ4 |
3w interface corp
CAGE Code: 4V367 |
|
3 dimensional engineering inc
CAGE Code: 1HLX4 |
2 mb distribution
CAGE Code: FAH01 |
|
60 degrees pharmaceuticals llc
CAGE Code: 71D06 |
11 30 elo touchsystems inc
CAGE Code: 1CEX6 |
|
3m co admininistrative electronic
CAGE Code: 20999 |
3 ring inc
CAGE Code: 68310 |
|
3 v fastener co inc
CAGE Code: 1ER65 |
| Part Number : MS21152-1 | Manufacturer : Society Of Automotive Engineers Inc | ||
| NSN Number : 3110-00-434-4653 (3110004344653) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 81343 | ||
| NIIN : 004344653 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number MS21152-1, that of which is listed with the description Bearing Ball Rod End; Manufactured by Society Of Automotive Engineers Inc and listed alongside the NSN 3110004344653, part number MS21152-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-434-4653 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 004344653 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| REP3H5FS464 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZE | SHANK DIAMETER | 0.4280 INCHES MINIMUM AND 0.4300 INCHES MAXIMUM |
| AAZF | SHANK STYLE | HOLLOW |
| ABHP | OVERALL LENGTH | 1.7555 INCHES MINIMUM AND 1.7755 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
| AGXJ | SHANK BORE DIAMETER | 0.2620 INCHES MINIMUM AND 0.2820 INCHES MAXIMUM |
| AGXK | SHANK BORE DEPTH | 0.8440 INCHES MINIMUM AND 0.9060 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATT | MATERIAL | STEEL COMP 4130 OUTER RING |
| MATT | MATERIAL | STEEL COMP 4130 SHAFT |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM OUTER RING |
| SFTT | SURFACE TREATMENT | CADMIUM ROD END BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
