| Part Number : W200010-1 | Manufacturer : Sora Power Inc | ||
| NSN : 5340-01-303-0015 (5340013030015) | |||
| Item Name : Clip Spring Tension | CAGE Code : 13058 | ||
| NIIN : 01-303-0015 (013030015) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 20815 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: W2000101 | |||
Thank you for taking an interest in part number W200010-1, that of which is listed with the description Clip Spring Tension; Manufactured by Sora Power Inc and listed alongside the NSN 5340013030015, part number W200010-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
20th century fiberglass
CAGE Code: 80241 |
3m industrial adhesives and tapes
CAGE Code: 0XV20 |
|
5s components inc
CAGE Code: 1LNJ8 |
3dfx interactive
CAGE Code: KA796 |
|
1 source electronics inc
CAGE Code: 551K1 |
3 d machining inc
CAGE Code: 09SY7 |
|
3h products co
CAGE Code: 0CJ60 |
2kr systems llc
CAGE Code: 730Z2 |
|
17th st photo supply inc
CAGE Code: 1VV61 |
3gen corporation
CAGE Code: 3SPS3 |
|
3 l filters ltd
CAGE Code: 37941 |
3m health care ltd
CAGE Code: U5989 |
|
3075109 canada inc
CAGE Code: L09L0 |
3 com/us robotics
CAGE Code: 1B8Q7 |
|
3 wire group inc
CAGE Code: 4X0B1,7VME3 |
| Part Number : W200010-1 | Manufacturer : Sora Power Inc | ||
| NSN Number : 5340-01-303-0015 (5340013030015) | |||
| Item Name : Clip Spring Tension | CAGE Code : 13058 | ||
| NIIN : 013030015 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number W200010-1, that of which is listed with the description Clip Spring Tension; Manufactured by Sora Power Inc and listed alongside the NSN 5340013030015, part number W200010-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-303-0015 Item PartTypeName: CLIP,SPRING TENSION | 5340 | 013030015 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| A360-359-1N | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABRY | LENGTH | 0.890 INCHES MAXIMUM |
| CJYS | LOOP/HOLDING DIMENSION | 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| AAUB | HOLE DIAMETER | 0.182 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| ABGL | WIDTH | 1.215 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.250 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.040 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| AZWE | DISTANCE FROM LOOP CENTER TO END | 0.755 INCHES MINIMUM AND 0.795 INCHES MAXIMUM |
| BPCM | SMALLEST WIDTH | 0.500 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | CENTER SLOT 0.198 IN. MIN AND 0.208 IN. MAX W BY 0.307 IN. MIN AND 0.317 IN. MAX LG; TABS LOCATED ON SIDES AT CENTER |
| MATT | MATERIAL | COPPER ALLOY 170 OVERALL OR COPPER ALLOY 172 OVERALL |
| SFTT | SURFACE TREATMENT | NICKEL OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-N-290 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
