| Part Number : 7791057 | Manufacturer : Springfield Armory | ||
| NSN : 5315-00-591-2082 (5315005912082) | |||
| Item Name : Pin Grooved Headless | CAGE Code : 19205 | ||
| NIIN : 00-591-2082 (005912082) | |||
| FSC Code : 5315 Nails Machine Keys and Pins | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 02386 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 7791057, that of which is listed with the description Pin Grooved Headless; Manufactured by Springfield Armory and listed alongside the NSN 5315005912082, part number 7791057 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 7791057 | Manufacturer : Springfield Armory | ||
| NSN Number : 5315-00-591-2082 (5315005912082) | |||
| Item Name : Pin Grooved Headless | CAGE Code : 19205 | ||
| NIIN : 005912082 | |||
| FSC CODE : 5315 Nails Machine Keys and Pins | |||
Thank you for taking an interest in part number 7791057, that of which is listed with the description Pin Grooved Headless; Manufactured by Springfield Armory and listed alongside the NSN 5315005912082, part number 7791057 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-00-591-2082 Item PartTypeName: PIN,GROOVED,HEADLESS | 5315 | 005912082 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5315-591-2082 | 2 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| ABHP | OVERALL LENGTH | 0.755 INCHES MAXIMUM |
| ABMZ | DIAMETER | 0.309 INCHES MINIMUM AND 0.311 INCHES MAXIMUM |
| ABNZ | EFFECTIVE LENGTH | 0.230 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.243 INCHES MINIMUM AND 0.245 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.285 INCHES MINIMUM AND 0.295 INCHES MAXIMUM |
| AMCS | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQFM | HARDNESS RATING | 51.0 ROCKWELL C MINIMUM OVERALL AND 55.0 ROCKWELL C MAXIMUM OVERALL |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-570 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | OXIDE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
