| Part Number : 7792282 | Manufacturer : Springfield Armory | ||
| NSN : 5905-00-709-6917 (5905007096917) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 19205 | ||
| NIIN : 00-709-6917 (007096917) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37406 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 7792282, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Springfield Armory and listed alongside the NSN 5905007096917, part number 7792282 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 7792282 | Manufacturer : Springfield Armory | ||
| NSN Number : 5905-00-709-6917 (5905007096917) | |||
| Item Name : Resistor Variable Wire Wound Non | CAGE Code : 19205 | ||
| NIIN : 007096917 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 7792282, that of which is listed with the description Resistor Variable Wire Wound Non; Manufactured by Springfield Armory and listed alongside the NSN 5905007096917, part number 7792282 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-709-6917 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 007096917 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | G | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7792282 | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.313 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.188 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.063 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.250 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.312 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 NOMINAL |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.000 KILOHMS SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| ABKW | OVERALL HEIGHT | 0.312 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.250 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.086 INCHES MINIMUM |
| ADAT | BODY WIDTH | 0.250 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| TEST | TEST DATA DOCUMENT | 20418-ES1642-202L DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
