| Part Number : SFT22-3A26 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-00-021-0433 (5305000210433) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 00-021-0433 (000210433) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: SFT223A26 | |||
Thank you for taking an interest in part number SFT22-3A26, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305000210433, part number SFT22-3A26 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SFT22-3A26 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-00-021-0433 (5305000210433) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 000210433 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number SFT22-3A26, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305000210433, part number SFT22-3A26 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-021-0433 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 000210433 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SFT22-3A26 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | Head Style | FLAT COUNTERSUNK |
| AHYM | Nominal Thread Diameter | 0.190 INCHES |
| CQFM | Hardness Rating | 22.0 ROCKWELL C MINIMUM OVERALL AND 26.0 ROCKWELL C MAXIMUM OVERALL |
| ANEE | Grip Length | 1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM |
| AASA | Thread Length | 0.210 INCHES MINIMUM AND 0.277 INCHES MAXIMUM |
| SFTT | Surface Treatment | CADMIUM OVERALL |
| THSD | Thread Series Designator | UNJF |
| AASL | Head Diameter | 0.325 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | Material | STEEL OVERALL |
| CQBC | Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH |
| ABQZ | Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| AAJF | Thread Direction | RIGHT-HAND |
| AASB | Fastener Length | 1.845 INCHES MINIMUM AND 1.892 INCHES MAXIMUM |
| AAUR | Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM |
| MRC | Decoded Requirement | Clear Text Reply |
| CMLP | Thread Quantity Per Inch | 32 |
| AAJD | Thread Class | 3A |
| MDCL | Material Document And Classification | SPS-M-107,STANDARD PRESSED STEEL CO MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| STDC | Surface Treatment Document And Classification | AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
