| Part Number : SFT22-7A84 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-00-441-0198 (5305004410198) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 00-441-0198 (004410198) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: SFT227A84 | |||
Thank you for taking an interest in part number SFT22-7A84, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305004410198, part number SFT22-7A84 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SFT22-7A84 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-00-441-0198 (5305004410198) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 004410198 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number SFT22-7A84, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305004410198, part number SFT22-7A84 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-441-0198 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 004410198 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SFT22-7A84 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | 0.437 INCHES |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| AASL | HEAD DIAMETER | 0.890 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| ANEE | GRIP LENGTH | 5.240 INCHES MINIMUM AND 5.260 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS |
| AASB | FASTENER LENGTH | 5.700 INCHES MINIMUM AND 5.747 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AAUR | GRIP DIAMETER | 0.4358 INCHES MINIMUM AND 0.4367 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.440 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
