| Part Number : 69197-4-11 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-00-445-4027 (5305004454027) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 00-445-4027 (004454027) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 69197411 | |||
Thank you for taking an interest in part number 69197-4-11, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305004454027, part number 69197-4-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
313 aerospace llc
CAGE Code: 3VEK3 |
5 prime 3 prime inc
CAGE Code: 1B2Z0 |
|
3m singapore pte ltd
CAGE Code: QA095 |
4 sure com inc
CAGE Code: 1LDH8 |
|
4 cs electronic packaging inc
CAGE Code: 60744 |
2056 company
CAGE Code: 7F967 |
|
1db metravib
CAGE Code: FAQ34 |
2 mb distribution
CAGE Code: FAH01 |
|
4 s mfg
CAGE Code: 0D9C0 |
2mb international
CAGE Code: FA7N3 |
|
136963 canada inc
CAGE Code: 3AD36 |
400hz repair
CAGE Code: 03MS6 |
|
3d
CAGE Code: 0WY47 |
21st century electronics inc
CAGE Code: 60092 |
|
2001 humana press inc
CAGE Code: 34CH3 |
| Part Number : 69197-4-11 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-00-445-4027 (5305004454027) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 004454027 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 69197-4-11, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305004454027, part number 69197-4-11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-445-4027 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 004454027 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 69197-4-11 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.886 INCHES NOMINAL FIRST HOLE |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES TOP OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| FEAT | SPECIAL FEATURES | CONICAL SURFACE OF HEAD 32 MICROINCHES |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NAS 498 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.316 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.989 INCHES MINIMUM AND 1.019 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
