| Part Number : AIC1023H5-10 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-00-450-4085 (5305004504085) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 06725 | ||
| NIIN : 00-450-4085 (004504085) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: AIC1023H510 | |||
Thank you for taking an interest in part number AIC1023H5-10, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305004504085, part number AIC1023H5-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AIC1023H5-10 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-00-450-4085 (5305004504085) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 06725 | ||
| NIIN : 004504085 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number AIC1023H5-10, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305004504085, part number AIC1023H5-10 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-450-4085 Item Description: SCREW,CLOSE TOLERANCE | 5305 | 004504085 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AIC1023H5-10 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ANEE | GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| SFTT | SURFACE TREATMENT | NICKEL AND CADMIUM OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| CRSQ | COUNTERSINK ANGLE | 59.75 DEGREES MINIMUM AND 60.25 DEGREES MAXIMUM |
| AASB | FASTENER LENGTH | 1.058 INCHES MINIMUM AND 1.088 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.531 INCHES MINIMUM AND 0.558 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS |
| AAUR | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| FEAT | SPECIAL FEATURES | BEARING SURFACE OF HEAD TO BE GROOVED TO 0.394 IN. MIN 0.396 IN. MAX DIA,0.092 IN. MIN 0.097 IN. MAX FROM TOP OF HEAD |
| AASA | THREAD LENGTH | 0.423 INCHES MINIMUM AND 0.473 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
