| Part Number : AIC1023H10 11 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-00-486-2577 (5305004862577) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 06725 | ||
| NIIN : 00-486-2577 (004862577) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number AIC1023H10 11, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305004862577, part number AIC1023H10 11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AIC1023H10 11 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-00-486-2577 (5305004862577) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 06725 | ||
| NIIN : 004862577 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number AIC1023H10 11, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305004862577, part number AIC1023H10 11 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| FEAT | SPECIAL FEATURES | BEARING SURFACE OF HEAD GROOVED TO 0.769 IN. MIN,0.771 IN. MAX DIA,0.155 IN. MIN,0.160 IN. MAX FROM TOP OF HEAD |
| ANEE | GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | NICKEL AND CADMIUM OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.625 INCHES |
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL |
| AASL | HEAD DIAMETER | 1.007 INCHES MINIMUM AND 1.034 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| AASB | FASTENER LENGTH | 1.541 INCHES MINIMUM AND 1.571 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.843 INCHES MINIMUM AND 0.893 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.6235 INCHES MINIMUM AND 0.6245 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
