| Part Number : 64040H10 17 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-00-487-5264 (5305004875264) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 00-487-5264 (004875264) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 64040H10 17, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305004875264, part number 64040H10 17 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 64040H10 17 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-00-487-5264 (5305004875264) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 004875264 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 64040H10 17, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305004875264, part number 64040H10 17 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ANEE | GRIP LENGTH | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | NICKEL AND CADMIUM OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.625 INCHES |
| AAJD | THREAD CLASS | 3A |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 59.75 DEGREES MINIMUM AND 60.25 DEGREES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| AASL | HEAD DIAMETER | 1.007 INCHES MINIMUM AND 1.034 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | 1.915 INCHES MINIMUM AND 1.945 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | BEARING SURFACE OF HEAD GROOVED TO 0.769 IN. MIN,0.771 IN. MAX DIA,0.155 IN. MIN,0.160 IN. MAX FROM TOP OF HEAD |
| AASA | THREAD LENGTH | 0.843 INCHES MINIMUM AND 0.893 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.6235 INCHES MINIMUM AND 0.6245 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
