| Part Number : 64040H4 20 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-00-487-5269 (5305004875269) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 00-487-5269 (004875269) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 64040H4 20, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305004875269, part number 64040H4 20 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 64040H4 20 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-00-487-5269 (5305004875269) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 004875269 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 64040H4 20, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305004875269, part number 64040H4 20 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | SPECIAL FEATURES | BEARING SURFACE OF HEAD GROOVED TO 0.323 IN. MIN,0.325 IN. MAX DIA,0.050 IN. MIN,0.055 IN. MAX FROM TOP OF HEAD |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.352 INCHES MINIMUM AND 0.402 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | NICKEL AND CADMIUM OVERALL |
| AASL | HEAD DIAMETER | 0.412 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| CRSQ | COUNTERSINK ANGLE | 59.75 DEGREES MINIMUM AND 60.25 DEGREES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS |
| AASB | FASTENER LENGTH | 1.612 INCHES MINIMUM AND 1.642 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
