| Part Number : HT4025L4D19 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-00-596-2584 (5305005962584) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 00-596-2584 (005962584) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number HT4025L4D19, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305005962584, part number HT4025L4D19 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HT4025L4D19 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-00-596-2584 (5305005962584) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 005962584 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HT4025L4D19, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305005962584, part number HT4025L4D19 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-596-2584 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 005962584 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11905-4DL19 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.469 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.657 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.081 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 1.188 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.521 INCHES MINIMUM FIRST HOLE AND 1.561 INCHES MAXIMUM FIRST HOLE |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
