| Part Number : 51B221-32H | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-00-805-4253 (5305008054253) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 00-805-4253 (008054253) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 51B22132H | |||
Thank you for taking an interest in part number 51B221-32H, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305008054253, part number 51B221-32H is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 51B221-32H | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-00-805-4253 (5305008054253) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 008054253 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 51B221-32H, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305008054253, part number 51B221-32H is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-805-4253 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 008054253 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 51B221-32H | 2 | 1 | C | 9 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | BUTTON |
| AASU | HEAD HEIGHT | 0.109 INCHES NOMINAL |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES NOMINAL FIRST HOLE |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.261 INCHES MINIMUM AND 0.308 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.260 INCHES MINIMUM AND 2.277 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.391 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 1.969 INCHES MINIMUM AND 1.999 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.117 INCHES NOMINAL FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| MATT | MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL OR QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
