| Part Number : NAS1152E4 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-00-828-4612 (5305008284612) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 00-828-4612 (008284612) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number NAS1152E4, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305008284612, part number NAS1152E4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : NAS1152E4 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-00-828-4612 (5305008284612) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 008284612 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number NAS1152E4, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305008284612, part number NAS1152E4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-828-4612 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 008284612 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS1152E4 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1152 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.511 INCHES MINIMUM AND 0.541 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.328 INCHES MINIMUM AND 0.337 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
