1 items in cart.

 13F026-00-0P

See Rfq Cart 
INSTANT RFQ
INSTANT RFQ
Enter List
Home    //   NSN   //   Sps Technologies Inc   //  NAS1203 46D

NAS1203-46D part number of Sps Technologies Inc - Order Now!

Part Number : NAS1203-46D Manufacturer : Sps Technologies Inc
NSN : 5305-00-925-7867 (5305009257867)
Item Name : Screw Close Tolerance CAGE Code : 80539
NIIN : 00-925-7867  (009257867)
FSC Code : 5305 Screws
FSG Code : 53 Hardware and Abrasives
INC Code : 29294
NCB Code : 00 Country : USA
Alternate P/N:  NAS120346D

Thank you for taking an interest in part number NAS1203-46D, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305009257867, part number NAS1203-46D is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Part NAS1203-46D With Different Manufacturers

NAS1203-46D

RFQ

NAS1203-46D

RFQ

NAS1203-46D

RFQ

NAS1203-46D

RFQ

NAS1203-46D

RFQ
Recently Viewed Parts
5192795
Newark Electronics Corporation
Parts Kit Engine Blower
NSN: 2815003643091
CAGE Code: 23862
RFQ
29-20001-206-21
Thales
RFQ

Related NSN Components to NAS1203-46D

NAS 583-R6
National Aerospace Standards Com
NSN: 5305-01-446-7626
CAGE Code: 80205 		NAS 2803-12
National Aerospace Standards Com
NSN: 5305-01-530-9646
CAGE Code: 80205
NAS-1611-007
National Aerospace Standards Com
NSN: 5331-01-077-3147
CAGE Code: 80205 		NAS 1738-B4-3
Aertekno Srl
NSN: 5320-00-999-2188
CAGE Code: AC910
NAS 4121
National Aerospace Standards Com
NSN: 5999-01-209-0650
CAGE Code: 80205 		NAS-434-D8
National Aerospace Standards Com
NSN: 5340-00-634-7856
CAGE Code: 80205
NAS-3A5
National Aerospace Standards Com
NSN: 5306-00-282-4298
CAGE Code: 80205 		NAS-1922-0875-3
National Aerospace Standards Com
NSN: 4730-01-414-7859
CAGE Code: 80205
NAS-1611-439
Parker Hannifin Corporation
NSN: 5331-01-326-9281
CAGE Code: 02697 		NAS-509-12
Zf Industrieantriebe Witten Gmbh
NSN: 5310-00-298-9255
CAGE Code: D9182
NAS 1723-4-3T
Zf Industrieantriebe Witten Gmbh
NSN: 5325-00-871-7941
CAGE Code: D9182 		NAS 463
National Aerospace Standards Com
NSN: 5310-01-706-3209
CAGE Code: 80205
NAS 1611-123
Thales Australia Bendigoland
NSN: 5331-01-094-5104
CAGE Code: Z0655 		NAS-1334C3C07F
Zf Industrieantriebe Witten Gmbh
NSN: 5315-01-018-5839
CAGE Code: D9182
NAS-1598C-06Y
Zf Industrieantriebe Witten Gmbh
NSN: 5330-01-081-5071
CAGE Code: D9182 		NAS-1-1-.5
American Tool And Die Inc
NSN: 5905-01-416-9014
CAGE Code: 11507

Top nsn Manufacturers

1343080 alberta ltd
CAGE Code: L0796 		5 11 inc
CAGE Code: 3YEL6
1db metravib
CAGE Code: FAQ34 		2connect it b v
CAGE Code: HG221
3d pep
CAGE Code: FB830 		2 mb distribution
CAGE Code: FAH01
4fastplumber llc
CAGE Code: 4P0W6 		21st century optics inc
CAGE Code: 0TN38
136963 canada inc
CAGE Code: 3AD36 		3m co engineering document systems
CAGE Code: 1BY21
3075109 canada inc
CAGE Code: L09L0 		4 r electro systems
CAGE Code: 1T600
360 tents l l c
CAGE Code: 4CT45 		4 s mfg
CAGE Code: 0D9C0
17 machinery llc
CAGE Code: 3FEG7

NAS1203-46D part number of Sps Technologies Inc - Order Now!

Part Number : NAS1203-46D Manufacturer : Sps Technologies Inc
NSN Number : 5305-00-925-7867 (5305009257867)
Item Name : Screw Close Tolerance CAGE Code : 80539
NIIN : 009257867
FSC CODE : 5305 Screws

Thank you for taking an interest in part number NAS1203-46D, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305009257867, part number NAS1203-46D is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number NAS1203-46D

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number NAS1203-46D with NSN 5305-00-925-7867, 5305009257867

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-00-925-7867

Item PartTypeName:

SCREW,CLOSE TOLERANCE

53050092578670N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
NAS1203-46D223

Characteristics Data of NSN 5305-00-925-7867, 5305009257867

MRCCriteriaCharacteristic
AAJDTHREAD CLASS3A
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.276 INCHES MINIMUM
AASBFASTENER LENGTH3.136 INCHES MINIMUM AND 3.166 INCHES MAXIMUM
AASKHEAD STYLEFLAT COUNTERSUNK
AASLHEAD DIAMETER0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
AAURGRIP DIAMETER0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
AAWBSHANK UNTHREADED HOLE DIAMETER0.070 INCHES NOMINAL FIRST HOLE
ABQZINTERNAL DRIVE STYLECROSS RECESS TYPE 1
AHYMNOMINAL THREAD DIAMETER0.190 INCHES
ANEEGRIP LENGTH2.875 INCHES NOMINAL
CMLPTHREAD QUANTITY PER INCH32
CQBCMINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
CQFMHARDNESS RATING36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
CRSQCOUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CRZSDISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER3.034 INCHES NOMINAL FIRST HOLE
MATTMATERIALSTEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATE
SFTTSURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNF
ZZZKSPECIFICATION/STANDARD DATA80205-NAS1203 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Upload  

Frequently Asked Questions (FAQ): NAS1203-46D NSN Part

What Type of Item Is Part Number NAS1203-46D?
  • Part Number NAS1203-46D is an "Screw Close Tolerance" manufactured by Sps Technologies Inc Managed with the NSN 5305-00-925-7867. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number NAS1203-46D?
  • Screw Close Tolerance To receive a competitive quote for items with the part number NAS1203-46D, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 80539 Important When Purchasing Part Number NAS1203-46D?
  • CAGE Code 80539 signifies Sps Technologies Inc Managed as the manufacturer of Part Number NAS1203-46D, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5305-00-925-7867 Paired with Part Number NAS1203-46D?
  • Part Number NAS1203-46D is the identification assigned to the item by Sps Technologies Inc Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5305-00-925-7867 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up