| Part Number : 73991H-7D29 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-013-9600 (5305010139600) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-013-9600 (010139600) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 73991H7D29 | |||
Thank you for taking an interest in part number 73991H-7D29, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305010139600, part number 73991H-7D29 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 73991H-7D29 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-013-9600 (5305010139600) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 010139600 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 73991H-7D29, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305010139600, part number 73991H-7D29 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-013-9600 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 010139600 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT8177-7D29 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.466 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 2.262 INCHES MINIMUM AND 2.309 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.880 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.111 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.438 INCHES |
| ANEE | GRIP LENGTH | 1.802 INCHES MINIMUM AND 1.822 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.134 INCHES MINIMUM FIRST HOLE AND 2.191 INCHES MAXIMUM FIRST HOLE |
| FEAT | SPECIAL FEATURES | HEAT TREATED AND PLATED |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MAC PS13145,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ZZZK | SPECIFICATION/STANDARD DATA | 76301-ST3-562 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
