| Part Number : HT4049-6D61 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-038-8694 (5305010388694) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 56878 | ||
| NIIN : 01-038-8694 (010388694) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HT40496D61 | |||
Thank you for taking an interest in part number HT4049-6D61, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305010388694, part number HT4049-6D61 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HT4049-6D61 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-038-8694 (5305010388694) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 56878 | ||
| NIIN : 010388694 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HT4049-6D61, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305010388694, part number HT4049-6D61 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-038-8694 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 010388694 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST3M714-6D61 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.366 INCHES MINIMUM AND 0.416 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 4.188 INCHES MINIMUM AND 4.218 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.111 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| ANEE | GRIP LENGTH | 3.802 INCHES MINIMUM AND 3.822 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.113 INCHES MINIMUM FIRST HOLE AND 0.123 INCHES MAXIMUM FIRST HOLE |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 23-112,MCDONNEL DOUGLAS CORP MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
