| Part Number : 72494-4 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-119-6766 (5305011196766) | |||
| Item Name : Screw Cap Socket Head | CAGE Code : 56878 | ||
| NIIN : 01-119-6766 (011196766) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 16282 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 724944 | |||
Thank you for taking an interest in part number 72494-4, that of which is listed with the description Screw Cap Socket Head; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305011196766, part number 72494-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 72494-4 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-119-6766 (5305011196766) | |||
| Item Name : Screw Cap Socket Head | CAGE Code : 56878 | ||
| NIIN : 011196766 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 72494-4, that of which is listed with the description Screw Cap Socket Head; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305011196766, part number 72494-4 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-119-6766 Item PartTypeName: SCREW,CAP,SOCKET HEAD | 5305 | 011196766 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 72494-4 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.358 INCHES MINIMUM AND 0.393 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.530 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| AASL | HEAD DIAMETER | 0.153 INCHES MINIMUM AND 0.157 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.109 INCHES MINIMUM AND 0.112 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.0781 INCHES MINIMUM AND 0.0791 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | 170000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 20.0 DEGREES NOMINAL |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 TY 1 OR 2 OR 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
