| Part Number : ST3M652C5-11A | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-131-7558 (5305011317558) | |||
| Item Name : Screw Close Tolerance | CAGE Code : K5673 | ||
| NIIN : 01-131-7558 (011317558) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: ST3M652C511A | |||
Thank you for taking an interest in part number ST3M652C5-11A, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305011317558, part number ST3M652C5-11A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : ST3M652C5-11A | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-131-7558 (5305011317558) | |||
| Item Name : Screw Close Tolerance | CAGE Code : K5673 | ||
| NIIN : 011317558 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number ST3M652C5-11A, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305011317558, part number ST3M652C5-11A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-131-7558 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 011317558 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT4020-5-11A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.505 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.203 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| AASL | HEAD DIAMETER | 0.629 INCHES MINIMUM AND 0.634 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.088 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT,HORNET F/A-18 (E/F);AIRCRAFT,HORNET F/A-18 |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ANEE | GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| FEAT | SPECIAL FEATURES | FURNISHED WITH ONE O-RING |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
