| Part Number : BACB30EL4C8 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-146-9898 (5305011469898) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 56878 | ||
| NIIN : 01-146-9898 (011469898) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number BACB30EL4C8, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305011469898, part number BACB30EL4C8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : BACB30EL4C8 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-146-9898 (5305011469898) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 56878 | ||
| NIIN : 011469898 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number BACB30EL4C8, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305011469898, part number BACB30EL4C8 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-146-9898 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 011469898 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BACB30EL4-8 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.801 INCHES MINIMUM AND 0.831 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.350 INCHES MINIMUM AND 0.399 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 4130 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
