| Part Number : 123179V3R7D | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-199-3397 (5305011993397) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-199-3397 (011993397) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 123179V3R7D, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305011993397, part number 123179V3R7D is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 123179V3R7D | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-199-3397 (5305011993397) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 011993397 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 123179V3R7D, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305011993397, part number 123179V3R7D is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-199-3397 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 011993397 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LE111-0041-6307 | 5 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.338 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.761 INCHES MINIMUM AND 0.791 INCHES MAXIMUM |
| AASK | HEAD STYLE | OVAL COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.438 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.635 INCHES MINIMUM FIRST HOLE AND 0.675 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| FEAT | SPECIAL FEATURES | INTERNAL DRIVE RIBBED; DRY LUBRICANT |
| MATT | MATERIAL | TITANIUM ALLOY OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4967 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
