| Part Number : 123256-5R2512 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-265-8955 (5305012658955) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-265-8955 (012658955) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 1232565R2512 | |||
Thank you for taking an interest in part number 123256-5R2512, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305012658955, part number 123256-5R2512 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 123256-5R2512 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-265-8955 (5305012658955) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 012658955 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 123256-5R2512, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305012658955, part number 123256-5R2512 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-265-8955 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 012658955 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LE111-0044-2512 | 5 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.228 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.228 INCHES MINIMUM AND 1.248 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.577 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AAUM | LOCKING FEATURE | DETENT BALL GRIP |
| AAUR | GRIP DIAMETER | 0.3108 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| ANEE | GRIP LENGTH | 0.750 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 41.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.123 INCHES MINIMUM FIRST HOLE AND 1.138 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| FEAT | SPECIAL FEATURES | INTERNAL DRIVE RIBBED |
| MATT | MATERIAL | STEEL COMP 630 LOCKING FEATURE OR STEEL COMP 631 LOCKING FEATURE OR STEEL COMP 440C LOCKING FEATURE |
| MATT | MATERIAL | STEEL COMP E4340 FASTENER OR STEEL COMP 4140 FASTENER OR STEEL COMP 8740 FASTENER OR STEEL COMP 4130 FASTENER OR STEEL COMP 6150 FASTENER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643 ASSN STD 1ST MATERIAL RESPONSE LOCKING FEATURE OR AMS5644 ASSN STD 2ND MATERIAL RESPONSE LOCKING FEATURE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE LOCKING FEATURE |
| SFTT | SURFACE TREATMENT | CADMIUM FASTENER AND CHROMATE FASTENER |
| SFTT | SURFACE TREATMENT | PASSIVATE LOCKING FEATURE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE LOCKING FEATURE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
