| Part Number : AIC1652-3-5 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-356-8977 (5305013568977) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 06725 | ||
| NIIN : 01-356-8977 (013568977) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: AIC165235 | |||
Thank you for taking an interest in part number AIC1652-3-5, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305013568977, part number AIC1652-3-5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3e technologies international inc
CAGE Code: 1DEZ4 |
3m co electronics and communications
CAGE Code: 0ESF3,17325,70209,8M369 |
|
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
360 tents l l c
CAGE Code: 4CT45 |
|
1spatial ltd
CAGE Code: U3518 |
3m singapore pte ltd
CAGE Code: QA095 |
|
3 d machining inc
CAGE Code: 09SY7 |
3m espana sa
CAGE Code: 0211B,H7034 |
|
3m france
CAGE Code: F0347 |
3m aerospace
CAGE Code: R0844 |
|
313 aerospace llc
CAGE Code: 3VEK3 |
3m norge a s
CAGE Code: N0447 |
|
12 volt shop
CAGE Code: Z0JM2 |
3g shielding specialties lp
CAGE Code: 7PCU6 |
|
3m company
CAGE Code: 04963,06EF6,07WQ0,0G8N4,0J8T2,0K0U5,0KHE0,0KHE3,0L3U7,0R8C0,0T1L6,0TS02,0WJ98,0YMX0,1A9T3,1CHB0,1CM57,1DWR5,1E494,1K616,1LF36,1QDV5,27293,28112,28124,28156,28217,2H942,2K194,2V131,2Y823,34359,34360,3HUC7,50378,52152,52157,53387,54681,55203,69892,6A670,6H360,6L367,76381,7U948,94960,94962,9L291 |
| Part Number : AIC1652-3-5 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-356-8977 (5305013568977) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 06725 | ||
| NIIN : 013568977 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number AIC1652-3-5, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305013568977, part number AIC1652-3-5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-356-8977 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013568977 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AIC1652-3-5 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASA | THREAD LENGTH | 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT,B-2 BOMBER (ATB);SOT EQUIPMENT (SE),B-2 BOMBER |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL |
| ANEE | GRIP LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.642 INCHES MINIMUM AND 0.672 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES OVERALL |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | 0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
