| Part Number : AIC985 3D 4H | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-382-0693 (5305013820693) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 06725 | ||
| NIIN : 01-382-0693 (013820693) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number AIC985 3D 4H, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305013820693, part number AIC985 3D 4H is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AIC985 3D 4H | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-382-0693 (5305013820693) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 06725 | ||
| NIIN : 013820693 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number AIC985 3D 4H, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305013820693, part number AIC985 3D 4H is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-382-0693 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013820693 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5306-005-3D4H | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES NOMINAL FIRST HOLE |
| AASA | THREAD LENGTH | 0.363 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AAJD | THREAD CLASS | 3A |
| AASL | HEAD DIAMETER | 0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.613 INCHES NOMINAL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.473 INCHES NOMINAL FIRST HOLE |
| AGAV | III END ITEM IDENTIFICATION | PACER DAWN |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAWU | SINGLE SHEAR STRENGTH | 132000 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| CRTL | CRITICALITY CODE JUSTIFICATION | ANEE AND AAUR |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS672 NATIONAL SPEC 1ST TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.128 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
