| Part Number : 3M926-3L18 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-397-1784 (5305013971784) | |||
| Item Name : Screw Close Tolerance | CAGE Code : K5673 | ||
| NIIN : 01-397-1784 (013971784) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 3M9263L18 | |||
Thank you for taking an interest in part number 3M926-3L18, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305013971784, part number 3M926-3L18 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3M926-3L18 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-397-1784 (5305013971784) | |||
| Item Name : Screw Close Tolerance | CAGE Code : K5673 | ||
| NIIN : 013971784 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 3M926-3L18, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305013971784, part number 3M926-3L18 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-397-1784 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013971784 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT4068-3-18A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | 3M926-3L18 |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| ANEE | GRIP LENGTH | 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.406 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.297 INCHES MINIMUM AND 0.302 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMIL-C-83488, TYPE 2, CLASS 3 MIL SPEC 3RD TREATMENT RESPONSE OVERALL |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| AASB | FASTENER LENGTH | 1.110 INCHES MINIMUM AND 1.140 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL |
| SR-1 | MANUFACTURERS CODE | 76301 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
