1 items in cart.

 13F026-00-0P

See Rfq Cart 
INSTANT RFQ
INSTANT RFQ
Enter List
Home    //   NSN   //   Sps Technologies Inc   //  125301 4 14L

125301-4-14L part number of Sps Technologies Inc - Order Now!

Part Number : 125301-4-14L Manufacturer : Sps Technologies Inc
NSN : 5305-01-412-0840 (5305014120840)
Item Name : Screw Close Tolerance CAGE Code : 80539
NIIN : 01-412-0840  (014120840)
FSC Code : 5305 Screws
FSG Code : 53 Hardware and Abrasives
INC Code : 29294
NCB Code : 01 Country : USA
Alternate P/N:  125301414L

Thank you for taking an interest in part number 125301-4-14L, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014120840, part number 125301-4-14L is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Recently Viewed Parts
AIC1721-18CX
Others
RFQ
BACB30NR8K55
Others
RFQ

Related NSN Components to 125301-4-14L

125-00014
Kovatch Corp
NSN: 6350-01-315-7871
CAGE Code: 59556 		125-00638
Havelsan A S
NSN: 6920-27-048-9014
CAGE Code: T0806
125-01.125-250-ZCN80
Macrotech Polyseal Inc
NSN: 5330-01-577-9740
CAGE Code: 1XHG5 		125-00085-00
Garmin International Inc
NSN: 5935-01-641-9659
CAGE Code: 0TRC3
125-0007
Autek Systems Corp
NSN: 5905-01-294-5850
CAGE Code: 54817 		125-00030
Havelsan A S
NSN: 6920-27-047-4660
CAGE Code: T0806
125-0021-000
Malco Technologies Llc
NSN: 5940-01-093-7237
CAGE Code: 91886 		125-004
Hydraulics International Inc
NSN: 1680-01-568-6945
CAGE Code: 56529
125-0052
Autek Systems Corp
NSN: 5905-00-434-2579
CAGE Code: 54817 		125-00298
Havelsan A S
NSN: 6930-27-053-3507
CAGE Code: T0806
125-0005
Autek Systems Corp
NSN: 5905-00-169-3696
CAGE Code: 54817 		125-00456
Havelsan A S
NSN: 6930-27-049-0604
CAGE Code: T0806
125-0025
Autek Systems Corp
NSN: 5905-00-003-2541
CAGE Code: 54817 		125-00270
Havelsan A S
NSN: 6920-27-048-9354
CAGE Code: T0806
125-01.250-250B
Stillman Seal Corporation
NSN: 5330-01-032-0579
CAGE Code: 95272 		125-0001-001
Shugart Corp
NSN: 5999-01-140-9556
CAGE Code: 75102

Top nsn Manufacturers

28eme groupe geographique 3m co health care services sales
3h products co 3m deutschland gmbh
3 m federal systems dept 4 sure com inc
360 tents l l c 3 wire group inc
1 nci j bkm mrk k ligi 5605 n illinois inc
3m quante ag telekommunikation 4 m company inc
3m company 3 d machining inc
3m alaska

125301-4-14L part number of Sps Technologies Inc - Order Now!

Part Number : 125301-4-14L Manufacturer : Sps Technologies Inc
NSN Number : 5305-01-412-0840 (5305014120840)
Item Name : Screw Close Tolerance CAGE Code : 80539
NIIN : 014120840
FSC CODE : 5305 Screws

Thank you for taking an interest in part number 125301-4-14L, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014120840, part number 125301-4-14L is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.

Request a Quote for Part Number 125301-4-14L

Request a Quote

“*” Required Fields

Contact Information

Note: We Will Not Share Your Information With Any Third Parties.
   * All quotes / sales are subject to ASAP Semiconductor's
Terms and Conditions
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number 125301-4-14L with NSN 5305-01-412-0840, 5305014120840

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5305-01-412-0840

Item PartTypeName:

SCREW,CLOSE TOLERANCE

53050141208400N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
PBF1571-4-14L525

Characteristics Data of NSN 5305-01-412-0840, 5305014120840

MRCCriteriaCharacteristic
AHYMNominal Thread Diameter0.250 INCHES
AASKHead StyleFLAT COUNTERSUNK
ANEEGrip Length0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
CMLPThread Quantity Per Inch28
SFTTSurface TreatmentPASSIVATE OVERALL
AASAThread Length0.403 INCHES NOMINAL
ABQZInternal Drive StyleOFFSET CRUCIFORM (TORQUE SET)
CBBLFeatures ProvidedDRY FILM LUBRICANT
MDCLMaterial Document And ClassificationAMS 5844 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
AASLHead Diameter0.438 INCHES MINIMUM
AASBFastener Length1.263 INCHES MINIMUM AND 1.293 INCHES MAXIMUM
MRCDecoded RequirementClear Text Reply
AAJFThread DirectionRIGHT-HAND
THSDThread Series DesignatorUNJF
CRSQCountersink Angle129.0 DEGREES MINIMUM AND 131.0 DEGREES MAXIMUM
AAURGrip Diameter0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
MATTMaterialCOBALT COMP MP-35-N OVERALL
FEATSpecial FeaturesDRY FILM LUBRICANT ON THREADS ONLY
AAJDThread Class3A
Upload  

Frequently Asked Questions (FAQ): 125301-4-14L NSN Part

What Type of Item Is Part Number 125301-4-14L?
  • Part Number 125301-4-14L is an "Screw Close Tolerance" manufactured by Sps Technologies Inc Managed with the NSN 5305-01-412-0840. This part number is available for immediate purchase on our website, so do not hesitate to kick off purchasing today.
How Do I Request a Quote for Part Number 125301-4-14L?
  • Screw Close Tolerance To receive a competitive quote for items with the part number 125301-4-14L, simply fill out and submit the RFQ form provided on this page, being sure to include details such as your desired quantity, target price, and expected delivery date. We also ask that you provide us your name, email, and phone number so that we can deliver purchasing options promptly.
Why Is CAGE Code 80539 Important When Purchasing Part Number 125301-4-14L?
  • CAGE Code 80539 signifies Sps Technologies Inc Managed as the manufacturer of Part Number 125301-4-14L, ensuring that you only procure exactly what you require while having information on the exact facility the item traces back to.
Why Is NSN 5305-01-412-0840 Paired with Part Number 125301-4-14L?
  • Part Number 125301-4-14L is the identification assigned to the item by Sps Technologies Inc Managed, serving as an easy form of identification for the company’s supplied items. On the other hand, NSN 5305-01-412-0840 is a NATO-recognized code assigned to this item based on its design and use, serving as an identifier that may also be used for other manufacturers producing the same form of product. As such, utilizing both part number and NSN data ensures that you can locate and procure exact requirements.

Semiconductor’s Certifications and Memberships

Thank You for Visiting!

We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

top up