| Part Number : LD111-0045-0718 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-412-5369 (5305014125369) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 56878 | ||
| NIIN : 01-412-5369 (014125369) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: LD11100450718 | |||
Thank you for taking an interest in part number LD111-0045-0718, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014125369, part number LD111-0045-0718 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : LD111-0045-0718 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-412-5369 (5305014125369) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 56878 | ||
| NIIN : 014125369 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number LD111-0045-0718, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014125369, part number LD111-0045-0718 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-412-5369 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014125369 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LD111-0045-0718 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ANEE | GRIP LENGTH | 1.125 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| FEAT | SPECIAL FEATURES | OVERSIZE GRIP DIA |
| AASA | THREAD LENGTH | 0.599 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASL | HEAD DIAMETER | 0.826 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| AASB | FASTENER LENGTH | 1.709 INCHES MINIMUM AND 1.739 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.437 INCHES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUR | GRIP DIAMETER | 0.4521 INCHES MINIMUM AND 0.4526 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
