| Part Number : BACB30LU5P11X | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-435-9807 (5305014359807) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 01-435-9807 (014359807) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number BACB30LU5P11X, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014359807, part number BACB30LU5P11X is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : BACB30LU5P11X | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-435-9807 (5305014359807) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 80539 | ||
| NIIN : 014359807 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number BACB30LU5P11X, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014359807, part number BACB30LU5P11X is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-435-9807 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014359807 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BACB30LU5P11X | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PATCH THREADS |
| ANEE | GRIP LENGTH | 0.6775 INCHES MINIMUM AND 0.6975 INCHES MAXIMUM |
| MATT | MATERIAL | PLASTIC POLYAMIDE LOCKING FEATURE STEEL COMP E4340 OR STEEL COMP 8740 FASTENER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASA | THREAD LENGTH | 0.469 INCHES NOMINAL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASL | HEAD DIAMETER | 0.574 INCHES MINIMUM AND 0.637 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AASB | FASTENER LENGTH | 1.1415 INCHES MINIMUM AND 1.1715 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.3125 INCHES |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE FASTENER |
| AAUR | GRIP DIAMETER | 0.3266 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE FASTENER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
