| Part Number : 3M126 | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-468-9542 (5305014689542) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 0PTK6 | ||
| NIIN : 01-468-9542 (014689542) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 3M126, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014689542, part number 3M126 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3M126 | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-468-9542 (5305014689542) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 0PTK6 | ||
| NIIN : 014689542 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 3M126, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014689542, part number 3M126 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-468-9542 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014689542 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1262D4D34-6A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| AASA | THREAD LENGTH | 0.375 INCHES NOMINAL |
| AASL | HEAD DIAMETER | 0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.739 INCHES MINIMUM AND 0.759 INCHES MAXIMUM |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ANEE | GRIP LENGTH | 2.187 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.250 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AAUH | SPLINE MINOR DIAMETER | 0.1570 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.1600 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | ALUMINUM OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AGAV | III END ITEM IDENTIFICATION | USED ON FIGHTER AIRCRAFT (F18-E/F) |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS-SPECIAL THREAD LENGTH, PH13-8MO (125 KSI SHEAR) |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
