| Part Number : HT4020-5-19A | Manufacturer : Sps Technologies Inc | ||
| NSN : 5305-01-477-5835 (5305014775835) | |||
| Item Name : Screw Close Tolerance | CAGE Code : K5673 | ||
| NIIN : 01-477-5835 (014775835) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: HT4020519A | |||
Thank you for taking an interest in part number HT4020-5-19A, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014775835, part number HT4020-5-19A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HT4020-5-19A | Manufacturer : Sps Technologies Inc | ||
| NSN Number : 5305-01-477-5835 (5305014775835) | |||
| Item Name : Screw Close Tolerance | CAGE Code : K5673 | ||
| NIIN : 014775835 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number HT4020-5-19A, that of which is listed with the description Screw Close Tolerance; Manufactured by Sps Technologies Inc and listed alongside the NSN 5305014775835, part number HT4020-5-19A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-477-5835 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014775835 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| WC4020-5-19A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| SFTT | SURFACE TREATMENT | PASSIVATE FASTENER |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629, PH13-8MO ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| AASA | THREAD LENGTH | 0.531 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGAV | III END ITEM IDENTIFICATION | STRUCTURAL COMPONENTS; F18 AIRCRAFT |
| AHYM | NOMINAL THREAD DIAMETER | 0.3125 INCHES |
| AAJD | THREAD CLASS | 3A |
| AASL | HEAD DIAMETER | 0.575 INCHES NOMINAL |
| ANEE | GRIP LENGTH | 1.1775 INCHES MINIMUM AND 1.1975 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | O RING AND CETYL ALCOHOL LUBRICANT |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| MATT | MATERIAL | STEEL COMP XM-13 FASTENER |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASB | FASTENER LENGTH | 1.7025 INCHES MINIMUM AND 1.7495 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.0878 INCHES MINIMUM AND 0.0898 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | O-RING PER ST7M251, NO FINISH, NO LUBRICANT; MINIMUM 40 PERCENT OF NON-BEARING HEAD SURFACE COAT WITH WHITE PAINT, COLOR 37875 PER FED-STD-595, REMOVABLE WITH SOLVENT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE FASTENER |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AAUR | GRIP DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,CLOSE TOLERANCE-ASSEMBLY, 100 DEG COUNTERSUNK HEAD, DOVETAIL SLOT,CRES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
